The ORLAU Ankle Contracture Device (CCD) is an innovative solution for ankle rehabilitation. This custom-made device, fitted with the pioneering ORLAU Ankle CCD Lever Kit, offers a patient-friendly system that makes daily stretching of tight lower limb structures easier. The 3D-printed lever simplifies donning and doffing, encouraging consistent use for effective, long-term improvement in ankle mobility. Developed in partnership with Ricoh 3D, it’s an ergonomic and cost-effective solution for orthotists and patients across the UK.
The ORLAU Ankle Contracture Correction Device is an innovative and highly effective solution for ankle rehabilitation. This custom-made Contracture Correction Device (CCD) is fitted with the pioneering ORLAU Ankle CCD Lever Kit, a revolutionary accessory that addresses the long-standing challenge of difficult donning and doffing. This patient-friendly system makes daily stretching of tight lower limb structures easier, helping to improve ankle mobility over time.
This device is the result of a collaboration between the Orthotic Research & Locomotor Assessment Unit (ORLAU) and Ricoh 3D, creating a cost-effective, ergonomic, and easy-to-use solution for patients and orthotists across the UK.
The ORLAU Ankle CCD offers several key features that provide significant benefits to both patients and carers. The 3D-printed lever makes the donning and doffing process simple and ergonomic by temporarily disconnecting the stretching torque, which greatly enhances the user experience. In addition, our Custom Fabrication division can fit the ORLAU Ankle CCD Lever Kit to a wide range of AFOs and KAFOs, offering a tailored solution for even the most complex conditions. This versatile device applies a controlled stretching force to the affected joint, gradually helping to lengthen tight soft tissues and improve range of motion. By making the device easier to use without the need for additional tools, patients are more likely to wear it consistently, leading to more effective rehabilitation and a better overall outcome.
If you are purchasing the kit only, the Ankle CCD Lever Kit comprises two lever assemblies. When you order Quantity: 1, you will receive one kit, which includes two levers. For every unit you order, you’ll receive two levers. For example, if you order Quantity: 2, you will receive four levers.
To place an order for CCD Orthotics, please download and complete the CCD Order Form from the Orthometry Chart tab. Send the completed form to info@beagleortho.com. For any assistance, please contact our customer service team.
To read the full story of the ORLAU and Ricoh 3D partnership and its role in creating a more effective and user-friendly ankle rehabilitation device, read the story here.
A Game-Changer in Rehabilitation: The ORLAU Ankle CCD Lever Kit. The ORLAU Ankle CCD Lever Kit has been meticulously designed to revolutionise the rehabilitation process, offering significant benefits to orthotists, patients, and carers alike.
Manufactured with pride in Lancashire by our skilled team at Beagle Custom Fabrication, the ORLAU Ankle Contracture Correction Device stands out with its unique blend of traditional craftsmanship and advanced manufacturing techniques. This combination ensures it delivers exceptional quality, comfort, and support, making it a standout choice in the orthopaedic solutions market.
When you choose the ORLAU Ankle Contracture Correction Device , a UK-manufactured product, you’re not just investing in precision and reliability. You’re also making a conscious choice for a more sustainable future. Our local production helps reduce transportation emissions, minimises our carbon footprint, and ensures the ethical sourcing of materials.
Our commitment to UK manufacturing results in faster delivery times, ensuring you receive your products promptly. This efficiency, coupled with our reduced environmental impact and products designed with both performance and sustainability in mind, benefits healthcare providers and patients with greener, high-quality orthopaedic solutions, making you feel time-conscious and efficient.
At Beagle Orthopaedic, sustainability is at the heart of everything we do. Through digital transformation, automation, and responsible sourcing, we are actively reducing waste, improving efficiency, and lowering our carbon footprint. We are making significant strides toward a greener future by investing in CNC cutting and sewing technology, adopting sustainable materials, and transitioning to eco-friendly packaging. Our commitment to local sourcing supports UK businesses and minimises transportation emissions. These initiatives are not just about reducing our environmental impact – they also ensure that the NHS and the wider public benefit from high-quality, responsibly manufactured orthopaedic solutions. By embracing sustainable practices, we are helping healthcare providers meet their environmental targets while ensuring patients receive the best possible care. With an ambitious goal of achieving Net Zero emissions by 2050, Beagle Orthopaedic is leading the way in sustainable medical soft goods manufacturing, and our unwavering commitment to sustainability should reassure our stakeholders of our dedication and confidence in this journey.
A Contracture Correction Device (CCD) is a method for regularly stretching joints. By applying a controlled force, it helps to lengthen tight structures and, over time, can enable you to move your affected limbs further and more easily.
The ORLAU Ankle CCD Lever Kit is an innovative accessory that attaches to a custom-made CCD. This 3D-printed lever makes it much easier for patients to put on and remove their orthotic device (known as donning and doffing) by temporarily disconnecting the stretching torque.
Traditional devices can be difficult to use. The ORLAU lever has been designed to improve ergonomics and ease of use, which encourages patients to wear the device more consistently. It gradually applies a stretching force using leverage, making the rehabilitation process easier and more effective for both patients and carers.
Yes. Our Custom Fabrication division can fit the ORLAU Ankle CCD Lever Kit to a wide range of AFOs and KAFOs, offering a holistic and customised solution for even the most complex conditions.
The ORLAU Ankle Contracture Correction Device is an innovative and highly effective solution for ankle rehabilitation. This custom-made Contracture Correction Device (CCD) is fitted with the pioneering ORLAU Ankle CCD Lever Kit, a revolutionary accessory that addresses the long-standing challenge of difficult donning and doffing. This patient-friendly system makes daily stretching of tight lower limb structures easier, helping to improve ankle mobility over time.
This device is the result of a collaboration between the Orthotic Research & Locomotor Assessment Unit (ORLAU) and Ricoh 3D, creating a cost-effective, ergonomic, and easy-to-use solution for patients and orthotists across the UK.
The ORLAU Ankle CCD offers several key features that provide significant benefits to both patients and carers. The 3D-printed lever makes the donning and doffing process simple and ergonomic by temporarily disconnecting the stretching torque, which greatly enhances the user experience. In addition, our Custom Fabrication division can fit the ORLAU Ankle CCD Lever Kit to a wide range of AFOs and KAFOs, offering a tailored solution for even the most complex conditions. This versatile device applies a controlled stretching force to the affected joint, gradually helping to lengthen tight soft tissues and improve range of motion. By making the device easier to use without the need for additional tools, patients are more likely to wear it consistently, leading to more effective rehabilitation and a better overall outcome.
If you are purchasing the kit only, the Ankle CCD Lever Kit comprises two lever assemblies. When you order Quantity: 1, you will receive one kit, which includes two levers. For every unit you order, you’ll receive two levers. For example, if you order Quantity: 2, you will receive four levers.
To place an order for CCD Orthotics, please download and complete the CCD Order Form from the Orthometry Chart tab. Send the completed form to info@beagleortho.com. For any assistance, please contact our customer service team.
To read the full story of the ORLAU and Ricoh 3D partnership and its role in creating a more effective and user-friendly ankle rehabilitation device, read the story here.
A Game-Changer in Rehabilitation: The ORLAU Ankle CCD Lever Kit. The ORLAU Ankle CCD Lever Kit has been meticulously designed to revolutionise the rehabilitation process, offering significant benefits to orthotists, patients, and carers alike.
Manufactured with pride in Lancashire by our skilled team at Beagle Custom Fabrication, the ORLAU Ankle Contracture Correction Device stands out with its unique blend of traditional craftsmanship and advanced manufacturing techniques. This combination ensures it delivers exceptional quality, comfort, and support, making it a standout choice in the orthopaedic solutions market.
When you choose the ORLAU Ankle Contracture Correction Device , a UK-manufactured product, you’re not just investing in precision and reliability. You’re also making a conscious choice for a more sustainable future. Our local production helps reduce transportation emissions, minimises our carbon footprint, and ensures the ethical sourcing of materials.
Our commitment to UK manufacturing results in faster delivery times, ensuring you receive your products promptly. This efficiency, coupled with our reduced environmental impact and products designed with both performance and sustainability in mind, benefits healthcare providers and patients with greener, high-quality orthopaedic solutions, making you feel time-conscious and efficient.
At Beagle Orthopaedic, sustainability is at the heart of everything we do. Through digital transformation, automation, and responsible sourcing, we are actively reducing waste, improving efficiency, and lowering our carbon footprint. We are making significant strides toward a greener future by investing in CNC cutting and sewing technology, adopting sustainable materials, and transitioning to eco-friendly packaging. Our commitment to local sourcing supports UK businesses and minimises transportation emissions. These initiatives are not just about reducing our environmental impact – they also ensure that the NHS and the wider public benefit from high-quality, responsibly manufactured orthopaedic solutions. By embracing sustainable practices, we are helping healthcare providers meet their environmental targets while ensuring patients receive the best possible care. With an ambitious goal of achieving Net Zero emissions by 2050, Beagle Orthopaedic is leading the way in sustainable medical soft goods manufacturing, and our unwavering commitment to sustainability should reassure our stakeholders of our dedication and confidence in this journey.
A Contracture Correction Device (CCD) is a method for regularly stretching joints. By applying a controlled force, it helps to lengthen tight structures and, over time, can enable you to move your affected limbs further and more easily.
The ORLAU Ankle CCD Lever Kit is an innovative accessory that attaches to a custom-made CCD. This 3D-printed lever makes it much easier for patients to put on and remove their orthotic device (known as donning and doffing) by temporarily disconnecting the stretching torque.
Traditional devices can be difficult to use. The ORLAU lever has been designed to improve ergonomics and ease of use, which encourages patients to wear the device more consistently. It gradually applies a stretching force using leverage, making the rehabilitation process easier and more effective for both patients and carers.
Yes. Our Custom Fabrication division can fit the ORLAU Ankle CCD Lever Kit to a wide range of AFOs and KAFOs, offering a holistic and customised solution for even the most complex conditions.
The ORLAU Ankle Contracture Correction Device is an innovative and highly effective solution for ankle rehabilitation. This custom-made Contracture Correction Device (CCD) is fitted with the pioneering ORLAU Ankle CCD Lever Kit, a revolutionary accessory that addresses the long-standing challenge of difficult donning and doffing. This patient-friendly system makes daily stretching of tight lower limb structures easier, helping to improve ankle mobility over time.
This device is the result of a collaboration between the Orthotic Research & Locomotor Assessment Unit (ORLAU) and Ricoh 3D, creating a cost-effective, ergonomic, and easy-to-use solution for patients and orthotists across the UK.
The ORLAU Ankle CCD offers several key features that provide significant benefits to both patients and carers. The 3D-printed lever makes the donning and doffing process simple and ergonomic by temporarily disconnecting the stretching torque, which greatly enhances the user experience. In addition, our Custom Fabrication division can fit the ORLAU Ankle CCD Lever Kit to a wide range of AFOs and KAFOs, offering a tailored solution for even the most complex conditions. This versatile device applies a controlled stretching force to the affected joint, gradually helping to lengthen tight soft tissues and improve range of motion. By making the device easier to use without the need for additional tools, patients are more likely to wear it consistently, leading to more effective rehabilitation and a better overall outcome.
If you are purchasing the kit only, the Ankle CCD Lever Kit comprises two lever assemblies. When you order Quantity: 1, you will receive one kit, which includes two levers. For every unit you order, you’ll receive two levers. For example, if you order Quantity: 2, you will receive four levers.
To place an order for CCD Orthotics, please download and complete the CCD Order Form from the Orthometry Chart tab. Send the completed form to info@beagleortho.com. For any assistance, please contact our customer service team.
To read the full story of the ORLAU and Ricoh 3D partnership and its role in creating a more effective and user-friendly ankle rehabilitation device, read the story here.
A Game-Changer in Rehabilitation: The ORLAU Ankle CCD Lever Kit. The ORLAU Ankle CCD Lever Kit has been meticulously designed to revolutionise the rehabilitation process, offering significant benefits to orthotists, patients, and carers alike.
Manufactured with pride in Lancashire by our skilled team at Beagle Custom Fabrication, the ORLAU Ankle Contracture Correction Device stands out with its unique blend of traditional craftsmanship and advanced manufacturing techniques. This combination ensures it delivers exceptional quality, comfort, and support, making it a standout choice in the orthopaedic solutions market.
When you choose the ORLAU Ankle Contracture Correction Device , a UK-manufactured product, you’re not just investing in precision and reliability. You’re also making a conscious choice for a more sustainable future. Our local production helps reduce transportation emissions, minimises our carbon footprint, and ensures the ethical sourcing of materials.
Our commitment to UK manufacturing results in faster delivery times, ensuring you receive your products promptly. This efficiency, coupled with our reduced environmental impact and products designed with both performance and sustainability in mind, benefits healthcare providers and patients with greener, high-quality orthopaedic solutions, making you feel time-conscious and efficient.
At Beagle Orthopaedic, sustainability is at the heart of everything we do. Through digital transformation, automation, and responsible sourcing, we are actively reducing waste, improving efficiency, and lowering our carbon footprint. We are making significant strides toward a greener future by investing in CNC cutting and sewing technology, adopting sustainable materials, and transitioning to eco-friendly packaging. Our commitment to local sourcing supports UK businesses and minimises transportation emissions. These initiatives are not just about reducing our environmental impact – they also ensure that the NHS and the wider public benefit from high-quality, responsibly manufactured orthopaedic solutions. By embracing sustainable practices, we are helping healthcare providers meet their environmental targets while ensuring patients receive the best possible care. With an ambitious goal of achieving Net Zero emissions by 2050, Beagle Orthopaedic is leading the way in sustainable medical soft goods manufacturing, and our unwavering commitment to sustainability should reassure our stakeholders of our dedication and confidence in this journey.
A Game-Changer in Rehabilitation: The ORLAU Ankle CCD Lever Kit. The ORLAU Ankle CCD Lever Kit has been meticulously designed to revolutionise the rehabilitation process, offering significant benefits to orthotists, patients, and carers alike.
Manufactured with pride in Lancashire by our skilled team at Beagle Custom Fabrication, the ORLAU Ankle Contracture Correction Device stands out with its unique blend of traditional craftsmanship and advanced manufacturing techniques. This combination ensures it delivers exceptional quality, comfort, and support, making it a standout choice in the orthopaedic solutions market.
When you choose the ORLAU Ankle Contracture Correction Device , a UK-manufactured product, you’re not just investing in precision and reliability. You’re also making a conscious choice for a more sustainable future. Our local production helps reduce transportation emissions, minimises our carbon footprint, and ensures the ethical sourcing of materials.
Our commitment to UK manufacturing results in faster delivery times, ensuring you receive your products promptly. This efficiency, coupled with our reduced environmental impact and products designed with both performance and sustainability in mind, benefits healthcare providers and patients with greener, high-quality orthopaedic solutions, making you feel time-conscious and efficient.
At Beagle Orthopaedic, sustainability is at the heart of everything we do. Through digital transformation, automation, and responsible sourcing, we are actively reducing waste, improving efficiency, and lowering our carbon footprint. We are making significant strides toward a greener future by investing in CNC cutting and sewing technology, adopting sustainable materials, and transitioning to eco-friendly packaging. Our commitment to local sourcing supports UK businesses and minimises transportation emissions. These initiatives are not just about reducing our environmental impact – they also ensure that the NHS and the wider public benefit from high-quality, responsibly manufactured orthopaedic solutions. By embracing sustainable practices, we are helping healthcare providers meet their environmental targets while ensuring patients receive the best possible care. With an ambitious goal of achieving Net Zero emissions by 2050, Beagle Orthopaedic is leading the way in sustainable medical soft goods manufacturing, and our unwavering commitment to sustainability should reassure our stakeholders of our dedication and confidence in this journey.
A Contracture Correction Device (CCD) is a method for regularly stretching joints. By applying a controlled force, it helps to lengthen tight structures and, over time, can enable you to move your affected limbs further and more easily.
The ORLAU Ankle CCD Lever Kit is an innovative accessory that attaches to a custom-made CCD. This 3D-printed lever makes it much easier for patients to put on and remove their orthotic device (known as donning and doffing) by temporarily disconnecting the stretching torque.
Traditional devices can be difficult to use. The ORLAU lever has been designed to improve ergonomics and ease of use, which encourages patients to wear the device more consistently. It gradually applies a stretching force using leverage, making the rehabilitation process easier and more effective for both patients and carers.
Yes. Our Custom Fabrication division can fit the ORLAU Ankle CCD Lever Kit to a wide range of AFOs and KAFOs, offering a holistic and customised solution for even the most complex conditions.
A Contracture Correction Device (CCD) is a method for regularly stretching joints. By applying a controlled force, it helps to lengthen tight structures and, over time, can enable you to move your affected limbs further and more easily.
The ORLAU Ankle CCD Lever Kit is an innovative accessory that attaches to a custom-made CCD. This 3D-printed lever makes it much easier for patients to put on and remove their orthotic device (known as donning and doffing) by temporarily disconnecting the stretching torque.
Traditional devices can be difficult to use. The ORLAU lever has been designed to improve ergonomics and ease of use, which encourages patients to wear the device more consistently. It gradually applies a stretching force using leverage, making the rehabilitation process easier and more effective for both patients and carers.
Yes. Our Custom Fabrication division can fit the ORLAU Ankle CCD Lever Kit to a wide range of AFOs and KAFOs, offering a holistic and customised solution for even the most complex conditions.
Reviews
There are no reviews yet