Description
TheraCore® Finger Splint | Adjustable Finger Support & Stabilisation
The TheraCore® Finger Splint provides adjustable support and stabilisation for finger injuries and conditions requiring controlled joint positioning. Designed and manufactured in Lancashire, UK, by Beagle Orthopaedic, the splint features a mouldable aluminium stay that can be shaped to accommodate individual finger anatomy and help restrict movement at the affected joint.
Manufactured from lightweight, 100% breathable TheraCore® VA material, the splint combines a soft cotton liner with a hook-receptive outer surface for adaptable fastening. Two adjustable straps help maintain the splint’s position and provide a comfortable, secure fit. Its low-profile, universal design allows the splint to be adapted to different fingers, with dorsal or volar positioning determined by individual clinical requirements.
Clinical Focus
The TheraCore® Finger Splint provides external support and stabilisation for patients requiring controlled finger movement following injury or as part of the management of musculoskeletal conditions. It may be used for selected finger injuries, arthritis, trigger finger, and other conditions where restricting movement at a particular joint is clinically appropriate.
The splint incorporates a mouldable aluminium stay that provides structural support and can be shaped to maintain the finger in the position required for treatment. Depending on the affected joint and the movement that needs to be restricted, the splint may be fitted dorsally or volarly. Two adjustable fastening straps help secure the stay and maintain the required positioning, while the hook-receptive TheraCore® VA surface allows the fit to be adjusted.
The compact, breathable construction features a soft cotton liner and Thermy-tex antibacterial treatment to help manage moisture and maintain comfort during wear. Its universal sizing accommodates different finger sizes, while the required joint position, fitting arrangement and duration of use should be determined by a suitably qualified healthcare professional.
Placement Guide: Dorsal vs. Volar
The TheraCore® Finger Splint features a mouldable aluminium stay that provides structural support and can be shaped to accommodate individual finger anatomy and clinical requirements. Depending on the condition being treated, the splint may be positioned on the top (dorsal) or underside (volar) of the finger to help maintain the required joint position and restrict unwanted movement.
-
Dorsal Placement (Top of Finger) – Positions the mouldable aluminium stay along the back of the finger, providing support and helping restrict movement at the affected joint according to individual treatment requirements.
-
Volar Placement (Underside of Finger) – Positions the mouldable aluminium stay along the palm side of the finger, providing support and helping maintain the joint position required for treatment.
The appropriate placement and shaping of the aluminium stay depend on the affected joint, the nature of the injury or condition and the movement that needs to be restricted. Initial fitting and adjustments should be carried out by a suitably qualified healthcare professional.
Material & Clinical Performance
TheraCore® Technology
Features a lightweight, high-density structured foam core that is 100% breathable, helping maintain airflow and regulate temperature during prolonged wear. The soft cotton liner provides additional comfort against the skin. Manufactured without latex or PFAS.
TheraCore® VA Surface
Features a fully hook-receptive outer surface, allowing straps to be positioned securely at different points along the material for adjustable circumferential compression and a personalised fit.
Thermy-tex Protection
Treated with a specialised antibacterial, moisture-wicking finish that helps inhibit bacterial growth, reduce odours and manage moisture for improved skin comfort during prolonged wear.
Environmental Protection
Manufactured without PFAS (commonly known as ‘forever chemicals’) or neoprene, supporting Beagle Orthopaedic’s commitment to responsible material selection and more sustainable manufacturing practices.
Design & Construction Features
Mouldable Aluminium Stay
Features an internal aluminium stay that provides structural support and can be shaped to accommodate individual finger anatomy. The stay helps maintain the prescribed joint position and restricts unwanted movement according to clinical requirements.
Protective Stay Pocket
The aluminium stay is housed within a dedicated material pocket, helping maintain its position and providing a soft covering between the stay and the finger.
Two Adjustable Fastening Straps
Features two hook-and-loop straps that allow the splint to be secured around the finger. The adjustable fastening system helps maintain splint positioning while accommodating individual finger measurements.
Dorsal & Volar Positioning
The splint can be positioned on the top or underside of the finger, with the mouldable aluminium stay providing support according to the required joint position and direction of movement restriction.
Low-Profile Construction
Features a compact design that provides finger support without the bulk of a larger hand orthosis, allowing the splint to be fitted to individual treatment requirements.
Universal Fit
A one-size-fits-most design with adjustable straps and a mouldable aluminium stay, allowing the splint to accommodate a range of finger sizes.
Indications for Use
- Trigger Finger – Provides support and helps limit movement at selected finger joints where controlled positioning is recommended to manage catching or locking.
- Mallet Finger – May be suitable for selected cases requiring the fingertip joint to be maintained in extension, provided the splint can achieve the prescribed position and is fitted by a suitably qualified healthcare professional.
- Finger Fractures & Post-Trauma Support – Provides external support and positioning for selected stable finger fractures and injuries where splinting is clinically indicated.
- Sprains & Ligament Injuries – Helps support affected finger joints and restrict unwanted movement following selected ligament sprains or soft tissue injuries.
- Tendonitis & Repetitive Strain Injuries – Provides support and controlled positioning to help limit movements that may aggravate affected tendons.
- Arthritis – Provides external support for selected finger joints affected by osteoarthritis or rheumatoid arthritis, according to individual positioning and movement requirements.
- Post-Operative Support – May be used to maintain prescribed finger positioning following surgery where this type of splint is recommended by the treating healthcare professional.
Design Features
The TheraCore® Finger Splint combines a mouldable aluminium stay with breathable TheraCore® VA material to provide adjustable finger support and stabilisation. Its two fastening straps, hook-receptive outer surface and compact construction allow the splint to be adapted to individual finger sizes and positioning requirements.
- TheraCore® Material – Lightweight, high-density structured foam with a 100% breathable core and soft cotton liner for comfort during prolonged wear. Manufactured without latex or PFAS.
- TheraCore® VA Technology – Features a hook-receptive outer surface that allows secure strap positioning and adjustable circumferential compression. Clinicians can adjust the fit as swelling changes during recovery.
- Integrated Thermy-tex Treatment – Specialised antibacterial, moisture-wicking treatment that helps inhibit bacterial growth, manage moisture and reduce unwanted odours for improved skin comfort during prolonged wear.
- Mouldable Aluminium Stay – Provides structural support and can be shaped to accommodate the finger and maintain the required joint position.
- Protective Stay Pocket – Houses the aluminium stay within the splint material, helping maintain its position and providing a soft covering against the finger.
- Two Adjustable Straps – Hook-and-loop fastenings allow the splint to be secured and adjusted to accommodate individual finger measurements.
- Dorsal & Volar Application – Can be positioned on the top or underside of the finger according to the affected joint and required level of movement restriction.
- Low-Profile Design – Compact construction provides targeted finger support without the bulk of a larger hand orthosis.
- Universal Fit – One-size-fits-most design suitable for a range of finger sizes, with adjustable fastening and a mouldable stay.
Benefits of Wearing a TheraCore® Finger Splint
The TheraCore® Finger Splint provides adjustable support and stabilisation for patients requiring controlled finger positioning. Its mouldable aluminium stay, breathable material and adjustable fastening system help maintain the required fit and support during everyday activities and clinician-directed recovery.
- Adjustable Finger Stabilisation – The mouldable aluminium stay provides structural support to help maintain the required joint position and restrict unwanted movement.
- Individual Finger Positioning – The stay can be shaped to accommodate individual finger anatomy and specific clinical positioning requirements.
- Versatile Application – Suitable for dorsal or volar positioning, allowing the splint to support different joints and movement restrictions when clinically appropriate.
- Secure, Adjustable Fit – Two adjustable hook-and-loop straps help secure the splint around the finger, accommodating individual finger measurements and helping maintain its position during wear.
- Breathable Material & Skin Comfort – The lightweight, 100% breathable TheraCore® VA foam and soft cotton liner allow airflow and help reduce heat build-up for comfort during prolonged wear.
- Compact Finger Support – The low-profile construction provides support to the affected finger without the bulk of a larger hand orthosis.
TheraCore®: Breathable & Antibacterial Orthopaedic Support Materials
TheraCore® Material. TheraCore® is a lightweight orthopaedic support material featuring a high-density, 100% breathable structured foam core and a soft cotton liner for comfort against the skin. Its durable textile outer layer provides a smooth finish, while the breathable construction allows airflow and helps reduce heat build-up during prolonged wear. Manufactured without latex, PFAS or neoprene.
TheraCore® VA Material. TheraCore® VA combines the same breathable foam core, soft cotton liner and material benefits as standard TheraCore®, with the addition of a hook-receptive outer surface. This allows hook-and-loop fastenings to be secured at different points across the material, providing adjustable compression, secure fastening and a personalised fit. Manufactured without latex, PFAS or neoprene.
Thermy-tex Antibacterial Treatment. Both TheraCore® and TheraCore® VA feature a specialised Thermy-tex antibacterial, moisture-wicking treatment. This helps inhibit bacterial growth on the material, manage perspiration and support faster drying. The treatment also helps reduce unwanted odours and maintain comfort and hygiene during prolonged wear.
TheraCore®: Material Composition & Skin Comfort
Material Composition. The TheraCore® and TheraCore® VA are manufactured without PFAS (commonly known as ‘forever chemicals’), latex or neoprene. These material properties support Beagle Orthopaedic’s approach to responsible material selection and more sustainable manufacturing practices.
Clinical Safety & Usability. The latex-free and neoprene-free construction provides an alternative for patients with sensitivities to these materials. The breathable foam core and soft cotton liner help maintain skin comfort during prolonged wear, making the materials suitable for a range of orthopaedic applications.
British Manufacturing & Net Zero Commitment
Manufactured in Lancashire, UK. Beagle Orthopaedic manufactures the TheraCore® Finger Splint at its Lancashire facility. UK-based production allows us to oversee manufacturing processes, maintain quality standards and supply customers and healthcare providers directly.
Manufacturing Technology. Our Lancashire facility uses CNC cutting and specialist sewing equipment to manufacture orthopaedic supports. These processes help maintain consistent production standards and support efficient material use.
Supporting NHS Sustainability Goals. Beagle Orthopaedic is committed to reducing its environmental impact through responsible material selection, efficient manufacturing and waste reduction. These activities form part of our wider sustainability commitments and efforts to support NHS net zero objectives.
| Size | Colour | Quantity | Codes |
|---|---|---|---|
| Universal | Black | 10 | TCFS.UNI.10 |
| Universal | Black | 30 | TCFS.UNI.30 |
TheraCore® Finger Splint | Adjustable Finger Support & Stabilisation
The TheraCore® Finger Splint provides adjustable support and stabilisation for finger injuries and conditions requiring controlled joint positioning. Designed and manufactured in Lancashire, UK, by Beagle Orthopaedic, the splint features a mouldable aluminium stay that can be shaped to accommodate individual finger anatomy and help restrict movement at the affected joint.
Manufactured from lightweight, 100% breathable TheraCore® VA material, the splint combines a soft cotton liner with a hook-receptive outer surface for adaptable fastening. Two adjustable straps help maintain the splint’s position and provide a comfortable, secure fit. Its low-profile, universal design allows the splint to be adapted to different fingers, with dorsal or volar positioning determined by individual clinical requirements.
Clinical Focus
The TheraCore® Finger Splint provides external support and stabilisation for patients requiring controlled finger movement following injury or as part of the management of musculoskeletal conditions. It may be used for selected finger injuries, arthritis, trigger finger, and other conditions where restricting movement at a particular joint is clinically appropriate.
The splint incorporates a mouldable aluminium stay that provides structural support and can be shaped to maintain the finger in the position required for treatment. Depending on the affected joint and the movement that needs to be restricted, the splint may be fitted dorsally or volarly. Two adjustable fastening straps help secure the stay and maintain the required positioning, while the hook-receptive TheraCore® VA surface allows the fit to be adjusted.
The compact, breathable construction features a soft cotton liner and Thermy-tex antibacterial treatment to help manage moisture and maintain comfort during wear. Its universal sizing accommodates different finger sizes, while the required joint position, fitting arrangement and duration of use should be determined by a suitably qualified healthcare professional.
Placement Guide: Dorsal vs. Volar
The TheraCore® Finger Splint features a mouldable aluminium stay that provides structural support and can be shaped to accommodate individual finger anatomy and clinical requirements. Depending on the condition being treated, the splint may be positioned on the top (dorsal) or underside (volar) of the finger to help maintain the required joint position and restrict unwanted movement.
-
Dorsal Placement (Top of Finger) – Positions the mouldable aluminium stay along the back of the finger, providing support and helping restrict movement at the affected joint according to individual treatment requirements.
-
Volar Placement (Underside of Finger) – Positions the mouldable aluminium stay along the palm side of the finger, providing support and helping maintain the joint position required for treatment.
The appropriate placement and shaping of the aluminium stay depend on the affected joint, the nature of the injury or condition and the movement that needs to be restricted. Initial fitting and adjustments should be carried out by a suitably qualified healthcare professional.
Material & Clinical Performance
TheraCore® Technology
Features a lightweight, high-density structured foam core that is 100% breathable, helping maintain airflow and regulate temperature during prolonged wear. The soft cotton liner provides additional comfort against the skin. Manufactured without latex or PFAS.
TheraCore® VA Surface
Features a fully hook-receptive outer surface, allowing straps to be positioned securely at different points along the material for adjustable circumferential compression and a personalised fit.
Thermy-tex Protection
Treated with a specialised antibacterial, moisture-wicking finish that helps inhibit bacterial growth, reduce odours and manage moisture for improved skin comfort during prolonged wear.
Environmental Protection
Manufactured without PFAS (commonly known as ‘forever chemicals’) or neoprene, supporting Beagle Orthopaedic’s commitment to responsible material selection and more sustainable manufacturing practices.
Design & Construction Features
Mouldable Aluminium Stay
Features an internal aluminium stay that provides structural support and can be shaped to accommodate individual finger anatomy. The stay helps maintain the prescribed joint position and restricts unwanted movement according to clinical requirements.
Protective Stay Pocket
The aluminium stay is housed within a dedicated material pocket, helping maintain its position and providing a soft covering between the stay and the finger.
Two Adjustable Fastening Straps
Features two hook-and-loop straps that allow the splint to be secured around the finger. The adjustable fastening system helps maintain splint positioning while accommodating individual finger measurements.
Dorsal & Volar Positioning
The splint can be positioned on the top or underside of the finger, with the mouldable aluminium stay providing support according to the required joint position and direction of movement restriction.
Low-Profile Construction
Features a compact design that provides finger support without the bulk of a larger hand orthosis, allowing the splint to be fitted to individual treatment requirements.
Universal Fit
A one-size-fits-most design with adjustable straps and a mouldable aluminium stay, allowing the splint to accommodate a range of finger sizes.
Indications for Use
- Trigger Finger – Provides support and helps limit movement at selected finger joints where controlled positioning is recommended to manage catching or locking.
- Mallet Finger – May be suitable for selected cases requiring the fingertip joint to be maintained in extension, provided the splint can achieve the prescribed position and is fitted by a suitably qualified healthcare professional.
- Finger Fractures & Post-Trauma Support – Provides external support and positioning for selected stable finger fractures and injuries where splinting is clinically indicated.
- Sprains & Ligament Injuries – Helps support affected finger joints and restrict unwanted movement following selected ligament sprains or soft tissue injuries.
- Tendonitis & Repetitive Strain Injuries – Provides support and controlled positioning to help limit movements that may aggravate affected tendons.
- Arthritis – Provides external support for selected finger joints affected by osteoarthritis or rheumatoid arthritis, according to individual positioning and movement requirements.
- Post-Operative Support – May be used to maintain prescribed finger positioning following surgery where this type of splint is recommended by the treating healthcare professional.
Design Features
The TheraCore® Finger Splint combines a mouldable aluminium stay with breathable TheraCore® VA material to provide adjustable finger support and stabilisation. Its two fastening straps, hook-receptive outer surface and compact construction allow the splint to be adapted to individual finger sizes and positioning requirements.
- TheraCore® Material – Lightweight, high-density structured foam with a 100% breathable core and soft cotton liner for comfort during prolonged wear. Manufactured without latex or PFAS.
- TheraCore® VA Technology – Features a hook-receptive outer surface that allows secure strap positioning and adjustable circumferential compression. Clinicians can adjust the fit as swelling changes during recovery.
- Integrated Thermy-tex Treatment – Specialised antibacterial, moisture-wicking treatment that helps inhibit bacterial growth, manage moisture and reduce unwanted odours for improved skin comfort during prolonged wear.
- Mouldable Aluminium Stay – Provides structural support and can be shaped to accommodate the finger and maintain the required joint position.
- Protective Stay Pocket – Houses the aluminium stay within the splint material, helping maintain its position and providing a soft covering against the finger.
- Two Adjustable Straps – Hook-and-loop fastenings allow the splint to be secured and adjusted to accommodate individual finger measurements.
- Dorsal & Volar Application – Can be positioned on the top or underside of the finger according to the affected joint and required level of movement restriction.
- Low-Profile Design – Compact construction provides targeted finger support without the bulk of a larger hand orthosis.
- Universal Fit – One-size-fits-most design suitable for a range of finger sizes, with adjustable fastening and a mouldable stay.
Benefits of Wearing a TheraCore® Finger Splint
The TheraCore® Finger Splint provides adjustable support and stabilisation for patients requiring controlled finger positioning. Its mouldable aluminium stay, breathable material and adjustable fastening system help maintain the required fit and support during everyday activities and clinician-directed recovery.
- Adjustable Finger Stabilisation – The mouldable aluminium stay provides structural support to help maintain the required joint position and restrict unwanted movement.
- Individual Finger Positioning – The stay can be shaped to accommodate individual finger anatomy and specific clinical positioning requirements.
- Versatile Application – Suitable for dorsal or volar positioning, allowing the splint to support different joints and movement restrictions when clinically appropriate.
- Secure, Adjustable Fit – Two adjustable hook-and-loop straps help secure the splint around the finger, accommodating individual finger measurements and helping maintain its position during wear.
- Breathable Material & Skin Comfort – The lightweight, 100% breathable TheraCore® VA foam and soft cotton liner allow airflow and help reduce heat build-up for comfort during prolonged wear.
- Compact Finger Support – The low-profile construction provides support to the affected finger without the bulk of a larger hand orthosis.
TheraCore®: Breathable & Antibacterial Orthopaedic Support Materials
TheraCore® Material. TheraCore® is a lightweight orthopaedic support material featuring a high-density, 100% breathable structured foam core and a soft cotton liner for comfort against the skin. Its durable textile outer layer provides a smooth finish, while the breathable construction allows airflow and helps reduce heat build-up during prolonged wear. Manufactured without latex, PFAS or neoprene.
TheraCore® VA Material. TheraCore® VA combines the same breathable foam core, soft cotton liner and material benefits as standard TheraCore®, with the addition of a hook-receptive outer surface. This allows hook-and-loop fastenings to be secured at different points across the material, providing adjustable compression, secure fastening and a personalised fit. Manufactured without latex, PFAS or neoprene.
Thermy-tex Antibacterial Treatment. Both TheraCore® and TheraCore® VA feature a specialised Thermy-tex antibacterial, moisture-wicking treatment. This helps inhibit bacterial growth on the material, manage perspiration and support faster drying. The treatment also helps reduce unwanted odours and maintain comfort and hygiene during prolonged wear.
TheraCore®: Material Composition & Skin Comfort
Material Composition. The TheraCore® and TheraCore® VA are manufactured without PFAS (commonly known as ‘forever chemicals’), latex or neoprene. These material properties support Beagle Orthopaedic’s approach to responsible material selection and more sustainable manufacturing practices.
Clinical Safety & Usability. The latex-free and neoprene-free construction provides an alternative for patients with sensitivities to these materials. The breathable foam core and soft cotton liner help maintain skin comfort during prolonged wear, making the materials suitable for a range of orthopaedic applications.
British Manufacturing & Net Zero Commitment
Manufactured in Lancashire, UK. Beagle Orthopaedic manufactures the TheraCore® Finger Splint at its Lancashire facility. UK-based production allows us to oversee manufacturing processes, maintain quality standards and supply customers and healthcare providers directly.
Manufacturing Technology. Our Lancashire facility uses CNC cutting and specialist sewing equipment to manufacture orthopaedic supports. These processes help maintain consistent production standards and support efficient material use.
Supporting NHS Sustainability Goals. Beagle Orthopaedic is committed to reducing its environmental impact through responsible material selection, efficient manufacturing and waste reduction. These activities form part of our wider sustainability commitments and efforts to support NHS net zero objectives.
- Trigger Finger – Provides support and helps limit movement at selected finger joints where controlled positioning is recommended to manage catching or locking.
- Mallet Finger – May be suitable for selected cases requiring the fingertip joint to be maintained in extension, provided the splint can achieve the prescribed position and is fitted by a suitably qualified healthcare professional.
- Finger Fractures & Post-Trauma Support – Provides external support and positioning for selected stable finger fractures and injuries where splinting is clinically indicated.
- Sprains & Ligament Injuries – Helps support affected finger joints and restrict unwanted movement following selected ligament sprains or soft tissue injuries.
- Tendonitis & Repetitive Strain Injuries – Provides support and controlled positioning to help limit movements that may aggravate affected tendons.
- Arthritis – Provides external support for selected finger joints affected by osteoarthritis or rheumatoid arthritis, according to individual positioning and movement requirements.
- Post-Operative Support – May be used to maintain prescribed finger positioning following surgery where this type of splint is recommended by the treating healthcare professional.
The TheraCore® Finger Splint combines a mouldable aluminium stay with breathable TheraCore® VA material to provide adjustable finger support and stabilisation. Its two fastening straps, hook-receptive outer surface and compact construction allow the splint to be adapted to individual finger sizes and positioning requirements.
- TheraCore® Material – Lightweight, high-density structured foam with a 100% breathable core and soft cotton liner for comfort during prolonged wear. Manufactured without latex or PFAS.
- TheraCore® VA Technology – Features a hook-receptive outer surface that allows secure strap positioning and adjustable circumferential compression. Clinicians can adjust the fit as swelling changes during recovery.
- Integrated Thermy-tex Treatment – Specialised antibacterial, moisture-wicking treatment that helps inhibit bacterial growth, manage moisture and reduce unwanted odours for improved skin comfort during prolonged wear.
- Mouldable Aluminium Stay – Provides structural support and can be shaped to accommodate the finger and maintain the required joint position.
- Protective Stay Pocket – Houses the aluminium stay within the splint material, helping maintain its position and providing a soft covering against the finger.
- Two Adjustable Straps – Hook-and-loop fastenings allow the splint to be secured and adjusted to accommodate individual finger measurements.
- Dorsal & Volar Application – Can be positioned on the top or underside of the finger according to the affected joint and required level of movement restriction.
- Low-Profile Design – Compact construction provides targeted finger support without the bulk of a larger hand orthosis.
- Universal Fit – One-size-fits-most design suitable for a range of finger sizes, with adjustable fastening and a mouldable stay.
The TheraCore® Finger Splint provides adjustable support and stabilisation for patients requiring controlled finger positioning. Its mouldable aluminium stay, breathable material and adjustable fastening system help maintain the required fit and support during everyday activities and clinician-directed recovery.
- Adjustable Finger Stabilisation – The mouldable aluminium stay provides structural support to help maintain the required joint position and restrict unwanted movement.
- Individual Finger Positioning – The stay can be shaped to accommodate individual finger anatomy and specific clinical positioning requirements.
- Versatile Application – Suitable for dorsal or volar positioning, allowing the splint to support different joints and movement restrictions when clinically appropriate.
- Secure, Adjustable Fit – Two adjustable hook-and-loop straps help secure the splint around the finger, accommodating individual finger measurements and helping maintain its position during wear.
- Breathable Material & Skin Comfort – The lightweight, 100% breathable TheraCore® VA foam and soft cotton liner allow airflow and help reduce heat build-up for comfort during prolonged wear.
- Compact Finger Support – The low-profile construction provides support to the affected finger without the bulk of a larger hand orthosis.
TheraCore® Material. TheraCore® is a lightweight orthopaedic support material featuring a high-density, 100% breathable structured foam core and a soft cotton liner for comfort against the skin. Its durable textile outer layer provides a smooth finish, while the breathable construction allows airflow and helps reduce heat build-up during prolonged wear. Manufactured without latex, PFAS or neoprene.
TheraCore® VA Material. TheraCore® VA combines the same breathable foam core, soft cotton liner and material benefits as standard TheraCore®, with the addition of a hook-receptive outer surface. This allows hook-and-loop fastenings to be secured at different points across the material, providing adjustable compression, secure fastening and a personalised fit. Manufactured without latex, PFAS or neoprene.
Thermy-tex Antibacterial Treatment. Both TheraCore® and TheraCore® VA feature a specialised Thermy-tex antibacterial, moisture-wicking treatment. This helps inhibit bacterial growth on the material, manage perspiration and support faster drying. The treatment also helps reduce unwanted odours and maintain comfort and hygiene during prolonged wear.Material Composition. The TheraCore® and TheraCore® VA are manufactured without PFAS (commonly known as ‘forever chemicals’), latex or neoprene. These material properties support Beagle Orthopaedic’s approach to responsible material selection and more sustainable manufacturing practices.
Clinical Safety & Usability. The latex-free and neoprene-free construction provides an alternative for patients with sensitivities to these materials. The breathable foam core and soft cotton liner help maintain skin comfort during prolonged wear, making the materials suitable for a range of orthopaedic applications.
Manufactured in Lancashire, UK. Beagle Orthopaedic manufactures the TheraCore® Finger Splint at its Lancashire facility. UK-based production allows us to oversee manufacturing processes, maintain quality standards and supply customers and healthcare providers directly.
Manufacturing Technology. Our Lancashire facility uses CNC cutting and specialist sewing equipment to manufacture orthopaedic supports. These processes help maintain consistent production standards and support efficient material use.
Supporting NHS Sustainability Goals. Beagle Orthopaedic is committed to reducing its environmental impact through responsible material selection, efficient manufacturing and waste reduction. These activities form part of our wider sustainability commitments and efforts to support NHS net zero objectives.
| Size | Colour | Quantity | Codes |
|---|---|---|---|
| Universal | Black | 10 | TCFS.UNI.10 |
| Universal | Black | 30 | TCFS.UNI.30 |









Reviews
There are no reviews yet